BEFORE STARTING WITH THE INSTALLATION
Substrates must be: dry and properly cured; flat and free of cracks; clean and free of dust, debris or lumps of cement; compact and strong
Substrates must be: dry and properly cured; flat and free of cracks; clean and free of dust, debris or lumps of cement; compact and strong marking the front of the tiles with pencils or markers.
Avoid Be particularly careful with glossy, matt or lapped tiles, which should be kept covered during building work.
Begin laying the tile from the center of the room, using your reference lines are you guide. Spread thin-set mortar with the notched edge of a trowel. As you lay your tile, use spacers
and levels to help ensure you have straight grout lines and that your installation is leveled. Remove the spacers and levers before the mortar dries. Clean up any excess immediately